Hi all,
A Vendor user is login to SNC but not able to download correct PO using Print functionality.
She is selecting a PO and getting a different PO.
Can anybody let me know what is causing the issue?
We have tried with her id in our PC but everything is working fine. We are getting desired results.
She is facing this problem in her PC it seems.
PFA the documentation of the error user is facing.
Regards
Mukund
Dear all,
I just set up a new NW CE 7.2 Developer Workplace and defined some process data with the help of NWDS. During the first deployment, i received an error log starting with the following lines:
com.sap.engine.services.dc.api.deploy.DeployException: [ERROR CODE DPL.DCAPI.1027] DeploymentException.
Reason: ASJ.dpl_dc.001085 An error occurred while deploying the deployment item...
During my research I found some threads learning me that this issue may result due to unauthorised deployment user. Up to now, I did not define a user for deployment process. I just entered my adminstrator login and password in order to access the UME database from NWDS.
Thanks in advance
Stefan
Hello Sir,
During the installation of ECC 6 with EHP 5 I received the below error :
ORA-16019 : Cannot use LOG_ARCHIVE_DEST_1 with LOG_ARCHIVE_DEST or LOG_ARCHIVE_DUPLEX_DEST disconnected.
Retry, VIew Log, Stop.
However, I was able to resolve the error message by following the below steps without closing the installation wizard :
1. Path c:\Oracle\SID\10204\database
2. Double click on initsid.ora and open with notepad
3. The initial value for LOG_ARCHIVE_DEST=C:\oracle\DEV\oraarch\DEVarch
4. I change the above value to LOG_ARCHIVE_DEST=''
5. Save the file and run the installation.
The SAP Application server has installed successfully without showing any other error messages.
But, the issue is when open my SAP MMC snap in and start the Application Server initially everything turns into green. The next second my Dispatcher+Work turns into Gray color and all my work process shows the status as ENDED,
0 DIA 1560 Ended no 1 0 0
1 DIA 1408 Ended no 1 0 0
2 DIA 1444 Ended no 1 0 0
3 DIA 1192 Ended no 1 0 0
4 DIA 1624 Ended no 1 0 0
5 DIA 1636 Ended no 1 0 0
6 DIA 548 Ended no 1 0 0
7 DIA 696 Ended no 1 0 0
8 DIA 1676 Ended no 1 0 0
9 DIA 1680 Ended no 1 0 0
10 UPD 1660 Ended no 1 0 0
11 ENQ 1656 Ended no 1 0 0
12 BTC 1620 Ended no 1 0 0
13 BTC 1652 Ended no 1 0 0
14 BTC 1948 Ended no 1 0 0
15 SPO 1792 Ended no 1 0 0
16 UP2 1796 Ended no 1 0 0
Do I have to change anything in the INITSID.ora, please help.
Thanking You.
Hi,
I am not able to login to SLD of solman system. I am able to open the link of SLD. Also, I am not able to login to UME or system info also. It is giving wrong user name of password issue.
I have checked the rfc SAPSLDAPI and its working fine.
Also, in SLDAPICUST, check is getting failed with below error:
An exception has occurred:
Exception in SLD client: AbapSLDRequestHandler.ping(): server connection *** failed *** on Fri Jun 17 05:30:26 EDT 2016
Connection to SLD does not work
In SLDCHECK, I am able to open the link, but not able to login to the SLD. Giving the wrong user name and password error.
Please suggest.
Regards,
Shyam Kumar
I have below mentioned system installed on Windows Server 2008 R2 Standard.
SAP Netweaver 7.0 SR3==>Central system==> ABAP
Oracle 10g
Windows 2k8 R2 64bit
The system is installed successfully.
Now, when I am trying to install gui710_22-10002995 for SAP Front-end or SAP Logon pad.
As given in MEDIA_INFORMATION_NW70SR3 document
I get below message :
With Administrative rights, I user below commands to switch to "install" and "execute" mode.
But still the same SAPStep message .....
Clicking "Yes" nothing happens
Clicking "No" pop-up below screen.
Kindly suggest.
Hi Experts,
I need a suggestion.
We have very old logs in SM58.Can we clear those logs?
Can it affect DB consistency ?
Regards
N R
Hi all,
For a newly created user while executing FS10n, cumulative balance is showing different in the new user's id.
But for the previous user's id, it is showing correctly. Then i checked the authorization objects. I've given the below authorization objects
F_BKPF_BED
F_BKPF_BEK
F_BKPF_BES
F_BKPF_BLA
F_BKPF_BUK
F_BKPF_GSB
F_BKPF_KOA
F_FAGL_SEG
F_SKA1_BUK
But still the cumulative balance is showing wrong. Can anyone help me in finding the correct authorization object please?
Regards
Praveen
How much benefit or useful is P_ADMSYS_731 certification in present market situation? As HANA is in the main focus for SAP and then S4, will taking this professional certification helps in any way or is associate level enough? If S4HANA plays a major role in market are these basis certifications useless?
What path or direction should one follow to be a Techno-functional consultant?
@Denys van Kempen Any suggestions or thoughts here?
Regards,
Raj
Hi Experts,
Here I have requirement of collecting daily reports of System Availability (Memory utilization, CPU and process utilization in our SAP PI nwa page.
I am unaware of what all configuration need to be done in order to get the report for whole full day/working hours.
I have gone through System performance statistics and History Reports, but unable to get what all need to done.
Kindly help on the above issue.
Regards,
Ganesh.
Hi All,
We have installed Netweaver system on Windows with MSSQL . During the installation we have used single drive for all the componnets(executables(/usr/sap) , DB (data files) and LOG files)
Now is it possible to distribute those components to different drives in simple way . For example (/usr/sap) in D:Drive , DB(data files) in E:Drive and LOg in F:Drive
We could see two options
Option 1:
1.Take a full backup of the system
2.Uninstall the currently installed SAP
3.Install SAP again with using correct drivers(D for /usr/sap , E for DB , F for logs)
4.Restore from the backup taken before uninstalling
Option 2:
1.Uninstall CI alone without touching DB
2. Install CI Again on D:Drive
This will have both Data and log files in same Drive(E)
I believe both above approaches should automatically update the registry settings to new path if any
Is there any other simple way to do it , Please suggest
Regards,
Murali
Hi All,
Recently I came up with a scenario below.
In our Development and Production Solman System both we got a prompt to implement the version 17 (latest) of SAP Central Correction Note.
It has been done successfully without any issues in the development system.
Now we tried to implement the note to Production Solution Manager System through the transport request which got created as a result of applying the note there in the Development Solman system.
However during the import I got Transport Error regarding some program related syntax error. It's for one program only.
Also after that from the Solman_Setup screen when I am trying to navigate to System Preparation tab, I am getting Page cannot be displayed and rabax state error.
Checked the market place and got a note which is suggesting to remove a BADI enhancement after which the navigation issue should be resolved, same has been suggested by the SAP in the OSS message as well.
Now my question is since it's happening all in the production system, what is the best approach I can take to make it green again, as we don't have any previous snapshot of the system to restore.
Thanks and Regards
Anurag
Hi together,
I want to upload some packages via SAINT.
There I get the error 13.
If I try to uncar a package via SAPCAR in trans DIR I get the error in subject.
Does anybody know how to solve this problem?
The <sid>adm has 777 on the EPS directory.
Owner of EPS is root, however, in the past it did always work fine.
What is also very interesting, I could upload one package via SAINT and there it could uncar the .SAR successfully.
Therefore it is really strange.
I've already downloaded the newest sapcar.
Kind regards
Hello everyone,
I'm trying to install SAP GRC Access Control 10.1 with SAINT. But I always receive an error in phase XPRA_EXECUTION with returncode 8.
It's the first time I use SAINT.
So maybe somebody with more experience can help me?
Unfortunately it's urgent.
This is the error I receive (it's in german. But I hope you can understand it):
The log file is attached. It's splitted into 3 parts because the upload only allows a max size of 1 MB.
If you need more information, just ask.
I hope that you can help me.
Thank you!
My System:
Hi Experts,
We are doing migration from Linux/Oracle to Windows 2008 R2/MSSQL 2008 SP3. Previous SAP version is N/W 7.00 SP14, ECC 6.0 and old kernel 700 with 600 patch. We are only doing OS/DB migration without upgrade.
We have installed MSSQL 2008 and applied SP3 Patch.
We took Kernel 721 REL with 600 patch along with SL Controller 700 (51039102_13 (Earlier system has 700 release).
SWPM has run up to execution phase.
After this we stuck with an error in Phase “post load”
Notes verified:
http://service.sap.com/sap/support/notes/1817692
http://service.sap.com/sap/support/notes/1480785
SCN Thread:
https://scn.sap.com/thread/3686626
Please advice we are executing these with local OS administrator not SIDADM. Is this something related to MSSQL Authorization issue?
SWPM ERROR:
An error occurred while processing option SAP Business Suite 2005 > SAP ERP 6.0 Support Release 3 > Software Life-Cycle Options > System Copy > MS SQL Server > Target System Installation > Central System > Based on AS ABAP > Central System( Last error reported by the step: Process call 'D:\usr\sap\IVP\SYS\exe\uc\NTAMD64\dipgntab.exe -rwr40 -srctt DDNTT -srctf DDNTF -dsttt DDNTT -dsttf DDNTF -ttonly TT' exits with error code -1. For details see log file(s) dipgntab.log.)
ERROR in initialization (can't get R/3-version)
ERROR in initialization (can't get R/3-version)
D:\usr\sap\\D00\log\SLOG00.LOG: No such file or directory
rslgwr1(20): rstrbopen cannot open pre-existing SysLog file.
D:\usr\sap\\D00\log\SLOG00.LOG: No such file or directory
rslgwr1(11): rstrbopen cannot open SysLog file.
SysLog:iE1020160616124458000000000000 this TTY
: 0000
:SCSA 4096
SysLog:hBZA20160616124458000000000000 this TTY
: 0000
:SVERS dblink 1327
Best Regards,
Amarnath.
Hello gurus,
I facing a problem when I try to send new message for the SBWP. I have a production client (200), and I unable to send mail from SBWP. But when I go to the client 001, I can send mail from SBWP.
Could you help me with this issue?
Thanks,
Cleiton Folster Eli
Hi SAP Experts,
I'm trying to find a standard object (either a tcode, program, class or function module) that uploads a file to a content server (which is configured as file system storage). I'm looking for something similar to tcode OAAD. Or a guide as to how to store documents to file system storage via upload program. Thanks in advance.
Regards,
Arvin
Hello,
We are using SAP EHP5 ECC6.0 on HPux System.
In SAP we have configured one SMTP Node, and that on That node we configured SMTp relay Service in IIS, currently all mail function is working Properly for Company Domain.(Company1.com)
Now we need to add one more SMTP Node in SCOT for another Domain name (Company2.com)
How the users of Comapany1.com send there mail through SMTP Node 1 and How Company2.com Users will send mail through SMTP2 node.
In side address are We have maintained * because Users gone send mails to all over domains.
Please suggest how to force Company1.com user to send mails through smtp1 and company2.com via smtp2
Swapz
Hello!
I am new in authorization and roles.I am facing this problem user asking for t-code to assign but I couldn't understand among 5 roles to which role the t-code needs to be assigned.
Please help.
Hi All,
By mistake instead of giving the client number I gave the SID and now the transport is stuck with the truck.
I tried to delete the transport after taking a back up of respective co file and data file. Killed all the tp process. Refreshed the queue. Tried to add the transport again but no success.
Any suggesstions. This is a PRD import so little emergency.
Regards.
Hi all,
Good day.
I created some new users and given them rights of Purchase order creation, change and display. Now the user has a problem that in displaying of purchase order( ME23N), data is not coming in description.
I given again the authorization objects M_BEST_BSA, M_BEST_WRK, M_BEST_EKO, M_BEST_EKG to the same user, but again and again he is coming with this message.
I searched , but i couldn't find a reply.
Can anyone help me quickly 
Regards
Praveen
